
Horizon UltraLite "Shooting Star"
Low angle. Long reach. Zero hassle.
The UltraLite Shooting Star is a center-fed vertical dipole engineered around Horizon's low takeoff-angle architecture. It concentrates energy close to the horizon (about 27° typical), where HF skywave propagation is most efficient, so your first hop carries farther with less fuss. Compact, factory-tuned and travel-ready, it's built for home stations, rapid-deploy field work and emergency comms.
Key features
- Low takeoff-angle design (about 27° typical) for consistent long-distance HF.
- Omni-directional when ground-mounted, so no rotor is required.
- Plug-and-play: pre-assembled and tuned at the factory.
- Compact four-section fold-up form for quick setup and easy transport.
- No ground radials needed in the recommended ground-mount configuration.
- Rugged, serviceable construction with a nickel-coated aluminum frame and quality stainless steel hardware.
Bands: 10–40 meters
Most stations achieve a solid match across the intended segments. Your transceiver's tuner can broaden matching on some frequencies, depending on band and installation.

What's included (antenna only)
- UltraLite Shooting Star antenna (upper and lower verticals plus cross-arms)
- Center feed transformer assembly with SO-239 (50 Ω)
- Mounting hardware
- Quick-start tuning notes
- Ground mounting pole

Ways to buy it
10–40 m · HF
UltraLite Shooting Star
Covers 10–40 m, arrives pre-assembled and tuned, and sets up in minutes. Package includes the antenna, QuadraStand and travel bag.
$599.95
10–40 m · HF
Shooting Star, antenna only
The UltraLite Shooting Star center-fed vertical dipole with quick-start tuning notes.
$449.95
Recommended accessories
Portable stand
Horizon QuadraStand
Lightweight, easily assembles and disassembles, and fits neatly into the Horizon Travel Bag.
$129.95
36" x 10" x 10"
Horizon Travel Bag
Waterproof heavy-duty oxford cloth bag that carries the UltraLite with a QuadraStand or QuadraPod.
$69.95 Free shipping
How it works
The Shooting Star's geometry and feed strategy promote low-angle radiation, precisely where ionospheric skip is most effective for long distance. Compared with typical high-angle solutions, you get stronger first-bounce performance without towers, rotors or radial fields.
Setup (typical)
- Attach the lower and upper cross-arms; verify symmetry.
- Install the center feed assembly. Snug the hardware; do not over-torque.
- Mount on your stand or mast. The QuadraStand is recommended for portable use.
- Connect 50 Ω coax (PL-259 to SO-239).
- Power up at low power and verify SWR.
Typical specifications
| Type | Center-fed vertical dipole |
|---|---|
| Pattern | Omni-directional (ground-mounted) |
| Bands | 10–40 m |
| Takeoff angle | About 27° typical (site-dependent) |
| Connector | SO-239 (50 Ω) |
| Finish | Nickel-coated aluminum frame and quality stainless steel hardware |
Ideal for
Manual
Step-by-step assembly, power ratings, VSWR charts and mounting options are all in the Horizon UltraLite™ Instruction Manual (PDF).


