
2010 TransWorld Transformer Kit/Adapter
Turn your vertical into the "Big Dog."
Coupled with any TransWorld vertical dipole structure, your station becomes an on-the-air "Big Dog." Forget powering controllers, changing multiple switching arrays, or worrying about expensive control cables. All you need is our transformer, a feed line and a transceiver.
The Big Dog gives immediate access to several HF bands. It follows your transceiver and changes bands without pushing any buttons, changing switching arrays or re-tuning. Plus, it is priced less than the cumbersome switching arrays sold by other companies.
Key features
- Automatic band following: tracks your radio, with no buttons and no menus.
- No external power: just your feed line and transceiver.
- Multi-band HF access: work more stations with fewer steps.
- Compact and field-ready: lighter and simpler than switching arrays.
- Cost-effective: performance without the price and complexity of big control boxes.
What's included
- Big Dog transformer assembly
- Mounting hardware (as supplied)
- Quick-start instructions
Compatibility
- Designed for the Horizon UltraLite HF, TransWorld 2010, and similar center-fed vertical dipoles of comparable dimensions.
- Band coverage depends on the orientation and configuration of the host antenna.
Installation (summary)
- Remove any existing switching array or transformer from the antenna.
- Install the Big Dog transformer in its place, following the diagram in the instructions.
- Connect your 50 Ω feed line (SO-239/PL-259).
- Verify SWR at low power.


SWR performance (no tuner)
Most radios will run happily without a tuner on 10–30 m, and 20 m is exceptionally flat. On 40 m (and the upper end of 12 m), the transceiver's internal tuner may help some rigs achieve a perfect match, depending on structure size, orientation and working conditions.
At a glance
| Type | Auto-following HF transformer kit (drop-in) |
|---|---|
| Power | Transceiver-driven; no external power required |
| Use with | Horizon UltraLite HF, TransWorld structures and similar center-fed vertical dipoles |
| Install | In place of the existing transformer or switching array |
Typical use cases
- Rapid multi-band operation on HF vertical dipoles
- Portable and field deployments where simplicity matters
- Stations eliminating control cables, controllers and manual plug and switch boxes